| Subject | Text |
| Thanks for the reply gary. That's what I thought and it sucks :( I had another screen that is the sa |
| Re: Another question | [quote:de20e5c1d6="Anonymous"]Sorry to sound dense - but the panel - is that the screen itself (and |
|
|
| I have bad experience with this PDP. Usually is bad PDP module |
| Hi,
These are out of warranty repairs, the PDP,s are fine as I have tested them with working cards, |
| Philips Plasma tv with Samsung PDA | I am have problems locating a manual with circuit diagrams for a plasma Plililps 42 PF9966/37 using |
| the resistors and diode are failing due to the panel drive ics being sc, as these are part of the ri |
| hi minnie i have made a video to show you fault better
[url]http://www.youtube.com/watch?v=AKus6 |
| Re: 50MP1 | I have acquired 4 NEC 50 MP1 for free. They all pretty much have the same problem. They will displ |
| [quote:458f746099="gary"]probably a faulty pdp, have a very close look at the screen, check for any |
| what type of pdp is fitted in the unit, for some lg plasmas there is a repair kit consisting of both |
| 50MP1 Flashing LED | deejayess:-
1) Power off the unit (using power switch on underside of product)
2) Press & ho |
| Read this 5 plus time, sounds like a bad panel/pdp. |
| Before that,
SYMPTOM: Distorted or no picture
SOLUTION: In order to determine whether picture prob |
| My flat monitor has died | I have verified the all supply card complex and it is not a problem in the supply system. The protec |
| Can someone tell me, does a pdp hiss slightly?
I did notice that as the screen powers up there i |
| LG 42v6 Plasma Lower Y PCB Question | Hi,
Working on a Hitachi Plasma with the LG 42v6 PDP.
The display has a vertical data copy problem |
| NEC plasmasync 4210W | NEC Plasmasync 4210W
Hello Steve,
Well I drug it out off the closet after 2 years and it still d |
|
|
| unfortuanetly that ribbon is an integral part of the plasma panel and is not replaceable on its own. |
| classic symptom of a failed pdp |
| Service Manuals | All,
The service manuals do not include and schematics for the PSU or the PDP module PCB's.
Mi |
| pioneer plasma with no picture | I have a Pioneer pdp 436pu (4360HD) that is run by a Pioneer PDP-RO6U media receiver
Problem is no |
| LG MZ-42PZ24 Plasma TV | Hi,
Can anyone help with my plasma tv monitor problem, otherwise all I have is an expensive pictu |
| Vision / Orion PM-4230 Service Manual? | Has anyone got a copy of the service manual for a Vision PM-4230 Plasma TV, this is the same TV as t |
| These are board level repairs as far as Toshiba is concerned. If you have two bad sustain boards I p |
| samsung plasma PN58C550G1FXZA | Hello
I have a samsung with the pink banding issue BULLETIN NUMBER ASC20130528001
I have obtained |
| NEC PX-42VM3A-PDP module failure | Hello Bob,
Were you successful in aquiring the service manula for this system and might you know |
| Bad driver or PDP. |
| PX-42MA | Hi jean974,
Do you know which version you are looking for :-
PX-42VM1A
PX-42VM2A
PX-42VM3A
|
| Samsung power supply PS-507-PHN or LJ41-05253A or LJ92-01513 | Please,I need the schematic or service manual for this power supply. Its has a protection module tha |
| Fujitsu plasma SOT ID | I have a PDP driver board and I need to ID 2 components They are a SOT case with 3 lead on one side |